English >> Audi V8 Forum Previous   Index   Next   Flat   Threaded

Anonymous Re: it's the end :( [re: Francois Valery]       30/07/2004 13:13 Edit   Reply   Solenoid valve 4 and 5 are low resistance, 5 to 6 ohms and so the voltage drop across them will be low. To check if the solenoids resitance is correct 1 to 3 should read around 30-35 ohms, 4 and 5 5 to 6 ohms and the speed sender is 1k. The manual says "if clicking noises of the transmission relay in the control unit cannot be heard replace the control unit. There are many other tests which use the VAG 1527 which could identify it further. Post Extras

Entire thread Subject Posted by Posted on clutch change Francois Valery 20/07/2004 13:40 Re: clutch change Francois Valery   26/07/2004 17:13 Re: clutch change Dmitry B   29/07/2004 23:04 Re: clutch change Anonym   28/07/2004 08:36 Re: clutch change Anonymous   22/07/2004 17:17 Re: clutch change Francois Valery   23/07/2004 19:09 Re: clutch change Francois Valery   26/07/2004 18:52 Re: clutch change Anonymous   28/07/2004 14:10 it's the end :( Francois Valery   29/07/2004 16:06 Re: it's the end :( Francois Valery   29/07/2004 18:11 Re: it's the end :( Anonymous   30/07/2004 13:13 Re: it's the end :(auto trans filter ROB   08/08/2004 14:03 Re: it's the end :( Francois Valery   08/08/2004 13:00

UBB.threads™ 6.1

Generated in 0.035 seconds in which 0.031 seconds were spent on a total of 13 queries. Zlib compression enabled.