G.
|
|
|
Reged: 10/02/2011
|
Posts: 13
|
Loc: Northbrook, IL USA
|
|
No Start, 5 Fault Codes
10/02/2011 17:57
|
Edit
|
Reply
|
|
|
I recently changed the timing belt on my 91 Audi V8 with a 4.2 from a 93. The first time, i got the timing one tooth off, and it ran very poorly, if at all.
Anyway, i purchased all the needed tools, the cam locks and everything, and set it correctly this time. However, it wont start.
Last week i purchased a Ross Tech diagnostics unit to hook up to my laptop. Here are the five fault codes it gave me for the engine.
Sunday,06,February,2011,21:16:47:38869 VCDS Version: Release 10.6.3 Data version: 20101206
-------------------------------------------------------------------------------- --------------------------------------------------------------------------------
Address 01: Engine Labels: None Control Module Part Number: 441 907 557 DA Component and/or Version: MOTOR D01PMC 4 Software Coding: 0261203011 Work Shop Code: 1267357228 VCID: 5FC7A5A1F7BB 5 Faults Found:
00525 - Oxygen (Lambda) Sensor (G39) 03-10 - No Signal - Intermittent 00281 - Vehicle Speed Sensor (G68) 03-00 - No Signal 00515 - Camshaft Position (Hall) Sensor (G40) 30-10 - Open or Short to Plus - Intermittent 00513 - Engine Speed Sensor (G28) 03-00 - No Signal 00516 - Closed Throttle (Idle) Position Switch (F60) 30-00 - Open or Short to Plus
Readiness: N/A Sunday,06,February,2011,21:21:01:38869 VCDS Version: Release 10.6.3 Data version: 20101206
I have ordered a camshaft positions sensor from my mechanic, and am waiting for it to come in. I have also read that the Throttle position switch may need to be cleaned, i will post the link later.
Any ideas what to do? It turns over and everything, and sometimes it almost starts, but doesn't. I can post a video tonight or tomorrow.
Post Extras
|
|