|
|
Automatic trasmission difference HELP !
[re: ]
31/08/2015 14:29
|
Edit
|
Reply
|
|
|
What differences between ZH-HP24A AYU and AZG?
I have on my V8 3.6 1989 AYU, i want put AZG. Can I do?
Thank you everyone
Post Extras:
|
|
Roy F
|
|
|
|
|
|
|
Reged: 06/05/2006
|
|
Posts: 21669
|
|
Loc: Schweiz
|
|
|
Watch attachment... it should work, but maybe you should change the TCU too.
Gruess Roy
http://roy-fuchs.smugmug.com/
Post Extras:
|
|
|
Re: Automatic trasmission difference HELP !
[re: Roy F]
01/09/2015 07:55 Attachment (1614 downloads)
|
|
Edit
|
Reply
|
|
|
On my gearbox I read this code only :1043 401 881 F2 .
Can you help me to find correct model?
Thank you again.
Post Extras:
|
|
Roy F
|
|
|
|
|
|
|
Reged: 06/05/2006
|
|
Posts: 21669
|
|
Loc: Schweiz
|
|
|
This is just the casting-number of the aluminium-housing.
The possible places for the badge are shown in the attachment.
What's the number of the torque converter?
Gruess Roy
http://roy-fuchs.smugmug.com/
Post Extras:
|
|
|
Re: Automatic trasmission difference HELP !
[re: Roy F]
01/09/2015 09:27
|
|
Edit
|
Reply
|
|
|
I found it !! But no AYU but AKD n. 1043 040 019.
My problem initially in departure vibrated, suddenly does not move. Back it works well. I found the oil bright
On the torque write 138 002
Thanks
Post Extras:
|
|
Roy F
|
|
|
|
|
|
|
Reged: 06/05/2006
|
|
Posts: 21669
|
|
Loc: Schweiz
|
|
|
Better, I was wondering about 1989 and AYU 
If you really want to replace the AKD with the AZG you need to replace the front axels as well! AKD = Rzeppa homokinetic joint with 108mm flange, AZG = Tripode homokinetic joint with 100mm flange, the optical difference you will see from far away, Rzeppa's are "open" so you can look directly to the bearing balls, the Tripode's are closed (very nice because it's easier to handle without getting dirty hands )
Gruess Roy
http://roy-fuchs.smugmug.com/
Post Extras:
|
Previous
Index
Next
Flat
Threaded
