|
TANK GAUGE
09/04/2008 21:25
|
Edit
|
Reply
|
|
|
After my v8 -92 had been garaged for half a year with battery disconnected the tank gauge is missreading. When ignition is of it shows 1/4 tank an with full tank it bypass 1/1 and goes in top. When Í have used 65 liters it shows 5/8 so it seems the reading is moved about + 1/2 Any way I can calibrate it ?
Bengt
Post Extras:
|
Tim A.
|
|
|
|
Reged: 05/08/2003
|
Posts: 1991
|
Loc: Schleswig Holstein
|
|
|
Hi Bengt,
yes, the fuel gauge is adjustable. Generally you need a special tool but there is way, to do it wthout this tool:
1st: Drain your fuel reservoir or drive as long, until the fuel reservoire is empty (prepare an spare can with fuel in your car ) When I have to train a fuel reservoire, I do it like this: I drive the car until the reservoire is nearly empty. Then I dismantle the fuel return hose or pipe from the injektion and launch it into an auxiliary container or can. Then I keep the engine idling until it stalls.
2nd: Pull off the red knob for the checkcontrol in your dashboard. Behind this knob you can find the adjustment screw for the fuel gauge.
3rd: Use a small screwdriver (2 mm wide, 50 mm long) and turn it carefully until the gauge indicates an empty reservoire. The adjustment screw has about 1/2 turn way in each direction.
Beste Grüße
Tim
Post Extras:
|