English >> Audi V8 Forum Previous   Index   Next   Flat   Threaded

Pages: 1 Bengt Salmose Reged: 03/07/2003 Posts: 26 Loc: Skåne / Sweden Sump dismantling oilfilter in automatic gearbox       21/05/2006 18:16 Edit   Reply   Hi ! Anyone that knows if it is possible to take oilsump away from the automatic gearbox , with the exhaust crossover pipe in place. The cat´s is dismantled. Looks like to be little tricky but it also seems to be difficult to loosen the old bolts on the crossover pipe. Bengt Post Extras:       Edwin Andersson Reged: 17/05/2006 Posts: 4 Loc: Sweden, Guthenburg Re: Sump dismantling oilfilter in automatic gearbox [re: Bengt Salmose]       23/05/2006 11:22 Edit   Reply   I don´t think thats a good ideá. I´ts quite tight even whitout the crossoverpipes in place.. Audi V8 3.6L -91 Audi 90 2.3L 20V -90 Audi 90 2.2L -86 Post Extras:       Bengt Salmose Reged: 03/07/2003 Posts: 26 Loc: Skåne / Sweden Re: Sump dismantling oilfilter in automatic gearbox [re: Edwin Andersson]       23/05/2006 22:44 Edit   Reply   Hi ! You was quite right ! Had to take crosover pipes down to. Not so fun . Someone has changed bolts and nuts between downpipes and crosover pipes . Hardened long bolts and nuts . To hard to drill out so I had to grind the nuts of on one side with a tiny grindingmashine and then split the nut. Bengt Post Extras:       Pages: 1

Previous   Index   Next   Flat   Threaded

UBB.threads™ 6.1

Generated in 0.029 seconds in which 0.027 seconds were spent on a total of 13 queries. Zlib compression enabled.