Jeremy Ward () 12/12/2004 16:15

Re: pickagearstickagear

This is the "limp home mode" where the Transmission Control Unit (TCU) detects a problem, lights up all of the gear lights on the dash, and put the transmission in 3rd gear all of the time. You can use a jumper wire to 'blink' the trouble codes out of the computer; count the blinks, look at a chart, and you will know what the TCU thinks the problem is. This is very easy to do, and instructions can be found on Scott's website: http://www.sjmautotechnik.com/trouble_shooting/ecufv8.html Good luck! - Jeremy

UBB.threads™ 6.1

Generated in 0.001 seconds in which 0 seconds were spent on a total of 4 queries. Zlib compression enabled.